DESCRIPTION
Part Number: A06B-6079-H102
Description: ALPHA SERVO MODULE MDL SVM1-20 TYPE A/B
Product Series: A06B-6079
Control Series: FS0, FS15, FS16/18/20/21
Rated Input: 283-325V, 1.25 kW
Max Output Voltage 230V
Rated Output Current: L axis 5.9A
Manual No. B-65162
Standard DIN VDE 0160
This module drives a servo motor of the 200–V input series. Modules for one axis, two axes, and three axes are available. As the interface with the CNC, three types of interface are used: Type A, type B, and FSSB.
NAMING CONVENTION:
SVM–//(1)(2)(3)(4)(5)(6)
(1)Servo amplifier module
(2)Number of axes
1 = 1–axis amplifier, 2 = 2–axis amplifier, 3 = 3–axis amplifier
(3)Maximum current for the L–axis
(4)Maximum current for the M–axis
(5)Maximum current for the N–axis
(6)Input voltage
None = 200V, HV = 400V
The servo amplifier α series is designed to conform to the following European safety standard:
DIN VDE 0160 1988/1:1989 (Electronic devices used in a power facility and their incorporation into the facility)
To certify conformity to the standard, FANUC has obtained certification from TUV Rheinland, a third–party certification organization for European standards. In power magnetics cabinet design when the machine is to be CE–marked, the installation conditions described in the following sections should be considered carefully, based on the EC Machine Directives (directives based on 89/392/EEC).
[Remarks]
CE marking requires compliance with a related EN standard [EN 60204–1] (Electric Devices in Industrial Machines, Part 1: General Requirements). If an EN standard (or an IEC standard if no EN standard exists) exists for a component in the machine, the component must conform to that EN standard.
At present, however, no EN standard (or IEC standard) is defined for amplifiers. Based on the results of an investigation made by TUV Rheinland, an approved certification organization for the machine directives, FANUC set the above VDE standard as a target standard and designed the servo amplifier α series to conform to the standard. Therefore, this amplifier series satisfies the amplifier requirements for CE marking. The user can use these amplifiers without having to be concerned about safety.
